Engineering is a large field with many sub-disciplines. Petroleum engineering is a branch of engineering that focuses on the extraction of hydrocarbons. Crude oil and natural gas are the most significant components in petroleum engineering. The oil and gas industry is no less than the backbone of Canada’s economy, apart from agriculture. Being a land of natural resources, this industry can provide ample opportunities in the future. Pursuing masters in petroleum engineering in Canada will provide better exposure to the careers of petroleum engineers.
Petroleum engineering is an upstream field that deals with natural gas and petroleum exploration and extraction. The area is challenging, with a wide range of geographical elements of mining, petroleum, and gas exploration masters in petroleum engineering in Canada
The oil and natural gas industry is a growing industry that is constantly evolving. As the world’s fifth-largest producer of natural gas and oil, Canada has the opportunity to meet the demand for safely produced oil and gas while simultaneously encouraging job development and economic progress. So, if a student is looking forward to pursuing MS in petroleum engineering in Canada, one should consider applying to universities in that country that offer the said petroleum engineering courses in canada.
The oil and natural gas industry are almost always in need of engineers; thus, masters in petroleum engineering in Canada should not be overlooked. Canada has always been a hub of petroleum engineering universities that offers you world-class institutions to study the subject
Top Universities in Canada for Masters in Petroleum Engineering
Here is a list of top universities in Canada for ms in petroleum engineering:
Course Name
Name of The University
Duration
Fees
(One Year)
Exam Accepted
Master of Engineering (MEng) Petroleum Engineering
Dalhousie University
2 years
INR 11,42,399
GRE
IELTS 7/9
TOEFL 92/120
Master in Petroleum Systems Engineering
University of Regina
2 years
INR 4,81,678
IELTS 6.5/9
TOEFL 80/120
PTE 59/90
M.Eng. in Chemical and Petroleum Engineering
University of Calgary
2 years
INR 4,72,900
IELTS 7.0/9.0
TOEFL 86/120
Master of Science in Civil and Environmental Engineering – Petroleum Engineering (Thesis-based)
University of Alberta
15 months
INR 4,98,590
IELTS 6.5/9
TOEFL 91/120
PTE 59/90
Calculated at an exchange rate of 1 CAD = INR 58.75
Eligibility for MS in Petroleum Engineering in Canada
Different universities have different sets of eligibility criteria that students must meet if they wish to apply for masters in petroleum engineering in Canada. But, these criteria don’t differ much. By taking into consideration, MS in petroleum engineering in Canada eligibility have been cited below:
Qualification
Entry Criteria
12th
There is no specific cut-off to pass class 12th in almost all the universities.
Graduation
It is safe to keep a score of at least 70% for your graduation
A 4-year undergraduate degree is a must and it is advisable for every candidate to keep a significantly high percentage over the last two years (75% or more).
For the universities that consider GPA as their eligibility criteria, it is advisable for students to maintain a grade point of 3.0 on 4.0 point system
Applicants must have the necessary academic credentials to pursue graduate study in their chosen subject.
TOEFL
Marks: 92-120
It is advisable for the applicants to keep a score of a minimum 20 in all the sections.
PTE
Marks: 59-90
IELTS
Marks: 7-9
It is advisable for the applicants to keep a score of a minimum 6.0 in all the sections.
Note – The following data is accumulated keeping in view the maximum scores an applicant would require to be eligible for admission in masters of Petroleum Engineering in Canada. Some universities might even give admissions with a lower IELTS, PTE, and TOEFL score.
Documents required for Petroleum Engineering in Canada
You have to be cautious when it comes to sending documents to the university you want to apply for :
You are required to send all the transcripts from post – secondary and graduate institutions that you have attended to the respective university faculty that you are applying for. You can send it via email or by mail. Both email address and mail address are provided on the university website.
You need to provide your university faculty with an updated curriculum vitae (CV).
You need to have at least one reference letter that you can provide to university faculty. Some universities like University of Alberta are likely to ask for 3 academic references.
You also need to submit the result of your English proficiency test. (IELTS,PTE OR TOEFL).
All the international students must declare that they will be on study permit. One has to provide their immigration status. You have to get admission in the university first before you can apply for a study permit.
Masters in Petroleum Engineering in Canada Fees
Fees that you would have to pay for Masters in Petroleum Engineering could be summarized as follows :
Dalhousie University
Fee structure for Master of Engineering (MEng) Petroleum
1st-year tuition fees
Fee Component
Amount
Tuition & fees
INR 11,42,399
Other expenses in 1st Year
Fee Component
Amount
Hostel & Meals
INR 7,10,374
Insurance
INR 42,603
Transportation
INR 14,279
Books and Supplies
INR 79,002
Student Service fee
INR 19,604
Student Union fee
INR 9,071
Facilities renewal fee
INR 21,652
Society fee
INR 585
Application Fees
INR 6,730
Total
INR 9,03,900
University of Regina
Fee Structure for Master in Petroleum Systems Engineering
1st-year tuition fees
Fee Component
Amount
Tuition & fees
INR 4,81,678
Other expenses in 1st Year
Fee Component
Amount
Hostel & Meals
INR 6,90,653
Insurance
INR 17,029
Transportation
INR 10,241
Books & Supplies
INR 70,224
URSU fees
INR 7,315
Academic Technologies
INR 2,633
Total
INR 7,98,095
University of Calgary
Fee structure for M.Eng. in Chemical and Petroleum Engineering
Fee structure for Master of Science in Civil and Environmental Engineering – Petroleum Engineering (Thesis-based)
1st year tuition fees
Fee Component
Amount
Tuition & fees
INR 4,98,590
Other expenses in 1st Year
Fee Component
Amount
Hostel & Meals
INR 6,67,362
Insurance
INR 22,472
Transportation
INR 18,492
Non-instructional Fees
INR 61,329
Educational Supplies
INR 93,632
Recreation
INR 52,668
GSA Health Plan
INR 33,356
GSA Dental Plan
INR 25,164
Total
INR 9,74,475
The total cost of these universities is represented in the chart below
How to Apply?
A student can apply for two intakes – the September intake and the January intake. This can be done directly via the university portal or through an agent. But, it is advised to choose your agent carefully as your application will not be processed unless all the documents are submitted at the time of application. The admission ratio is also competitive because every year, a lot of international students apply from all around the world and the seats at the university are limited. So, it is suggested that students should carefully formulate their CVs and check all the documents before applying for petroleum engineering masters in Canada.
Scope of Masters in Petroleum Engineering in Canada
In 2020, Canadian oil and natural gas contributed $105 billion to the country’s GDP and supported about 400,000 employees across the country. It also provides the government with average annual revenue of $10 billion from 2017 to 2019.
Oil sands development has benefited almost every region in Canada in terms of employment generation and economic activity.
A thriving oil sands sector attracts capital, creates jobs, and supports public services, all of which contribute to a successful national economy. The oil sands of Canada bring riches to the entire country, not only just Alberta.
In conclusion, the oil and natural gas industry serves as the backbone of the country thus, making a lot of scope for Master degree in Petroleum Engineering in Canada.
Scholarships for MS in Petroleum Engineering in Canada
School of Mining and Petroleum Engineering, Department of Chemical and Materials Engineering
Chemical Engineering, Petroleum Engineering, Mechanical Engineering
Masters in Petroleum Engineering salary in Canada
Based on 17 salaries, a total salary of C$75,000 including tips, bonus, and overtime pay, can be achieved by an entry-level Petroleum Engineer with less than 1 year of experience. Based on 21 salaries, an early career Petroleum Engineer with 1-4 years of experience makes an average total salary of C$82,998. Based on 26 salaries, the average total salary for a mid-career Petroleum Engineer with 5-9 years of experience is C$98,799 per year. Based on 16 salaries, an experienced Petroleum Engineer with 10-19 years of experience makes an average total salary of C$112,995. Employees with a late-career (20 years or more) get an average total salary of C$140,000.
Jobs for Masters in Petroleum Engineering in Canada
Calgary employs over 74 percent of all petroleum engineers in Canada, and the companies with the top staff include St. John’s, Newfoundland, Edmonton, and Toronto, among others. People who work in the field of petroleum engineering generally have the following job titles.
Drilling and Recovery Chief Engineer
Exploitation Engineer- oil and gas
Exploitation Engineer- petroleum
Mud Engineer
Natural Gas Engineer
Offshore Drilling Engineer
Required English Language test for masters in Petroleum Engineering in Canada
Required English language test for MS in Petroleum Engineering can differ from university to university but it boils down to three tests namely –
The International English Language Testing System (IELTS) – 7/9
The Pearson Test of English (PTE) – 59/90
The Test of English as a Foreign Language (TOEFL) – 91/120
Is Canada good for masters in Petroleum Engineering?
Canada not only has a thriving oil and natural gas industry with plenty of job opportunities, but also world class educational institutions which provide masters in Petroleum Engineering. Not only this, but the cost of living in the country is also reasonable if you compare it with other countries. With ample job opportunities and a decent work-life balance, Canada is indeed good for masters in Petroleum Engineering.
How do you become a Petroleum Engineer in Canada?
To get a job as a Petroleum Engineer in Canada, this is what you essentially need –
It is necessary to have a bachelor’s degree in petroleum engineering or a similar engineering area.
It’s possible that a master’s or doctoral degree in a relevant engineering subject is necessary.
To approve engineering drawings and reports and to practise as a Professional Engineer, you must be approved by a provincial or territorial organisation of professional engineers (P.Eng.).
Engineers can register after completing a recognised educational programme and three or four years of supervised engineering work experience, as well as passing a professional practise examination.
How many years does it take to study MS in Petroleum Engineering in Canada?
It takes a maximum of 2 years to study MS in Petroleum Engineering in Canada but many universities offer courses with completion periods of 15 months and 18 months as well.
Rakhee Talukdar is an edtech expert with five years of experience in the education technology sector, focusing on K-12 and higher education systems in various countries, including Canada, USA, Finland, France, and Germany. Her background includes founding a startup and working with early-stage educational ventures, giving her a nuanced understanding of the challenges and opportunities within these educational landscapes. Additionally, Rakhee specializes in helping students craft compelling Statements of Purpose (SOPs) for studying abroad, leveraging her insights into different education systems to guide students in articulating their academic and professional goals effectively. Her comprehensive knowledge and strategic approach make her a valuable resource for students navigating their educational journeys and financial planning.
GPA CALCULATOR
EXPENSE CALCULATOR
Ielts band calculator
Education Loan Calculator
University partner
ACCOMMODATION
experience-center
our offices
)
